ANSI A (), Standard for Accessible and Usable Buildings and Facilities as mandated by law and incorporated by reference by the States and. the laws that are enacted in the United States of America and in the states and cities contained therein. ±. «ANSI A (), Standard for Accessible and. Major changes/additions from ICC ANSI A – found in the edition of A 1. ICC ANSI. A – Section. ICC ANSI A –
|Published (Last):||21 February 2017|
|PDF File Size:||3.77 Mb|
|ePub File Size:||8.62 Mb|
|Price:||Free* [*Free Regsitration Required]|
Access anywhere on computer, tablet, phone. Search content, annotate, bookmark, share. The specifications in this standard make sites, facilities, buildings and elements accessible to and usable by people with such a117.1-20003 disabilities as the inability. Spout outlets of wheel- chair accessible drinking fountains shall be 36 inches mm maximum above the floor.
A permanent seat at the head end of a17 bathtub or a removable in-tub seat shall be pro- vided. Tactile characters shall comply with Section X knee clearance of 24 inches mm minimum above the floor shall be permitted at lavatories and sinks used primarily by children ages 6 through 1 2 where the rim or counter surface is 31 inches mm maximum above the floor.
The International Symbol of Accessibil- ity shall comply with Figure Buttons shall be arranged with numbers in ascending order. In existing elevators, where a new car operating panel complying with Sec- tion Accessible routes shall con- sist of one or more of the following components: The space between the wall and the grab bar shall be 1 V 2 inches 38 mm. Door closers and door stops shall be per- mitted to be anei inches 1 mm minimum above the floor.
Each car shall be equipped with a self-leveling feature that will automatically bring arid maintain the car at landings within a tolerance of V 2 inch 13 mm under rated load- ing to zero loading conditions.
Spacing between individual char- acters shall be 10 percent minimum and 35 per- cent maximum of the character height.
The clear- ance between the platform sill and the edge of any runway landing shall be 1V 4 inch 32 mm maxi- mum. Plumbing Elements and Facilities Fig.
Clear floor spaces, clearances at fixtures, and turning spaces shall be permitted to overlap. The verbal announcement indicating the floor shall be q prior to the initiation of the door opening.
ICC/ANSI A – Accessible and Useable Buildings and Facilities
Grab bars shall be installed in any manner that provides a gripping surface anzi the locations specified in this standard and a not obstruct the clear floor space. Side wall grab bars complying with Section Hall signals, including in-car signals, shall comply with Section Accessible toilet and bathing rooms shall comply with Section Spout outlets of drinking fountains for standing persons shall be 38 inches mm minimum and 43 inches mm maximum above the floor.
Doors and gates shall be low energy power operated doors or gates complying with Section A clear floor space a17.1-2003 plying with Sectionpositioned for forward approach, shall be provided.
One full, unobstructed side of the clear floor space shall adjoin or overlap an accessi- ble route or adjoin another clear floor space. An exterior x117.1-2003 with a prepared surface for nasi use.
Water supply and drainpipes under lavatories and sinks shall be insulated or otherwise configured to protect against contact. A parallel approach complying with Section shall be permitted to a kitchen sink in a space where a cook top or conventional range is not a1117.1-2003. Pedestrian signals are not required to comply with the requirement for choosing audible tones. Elevator cars shall provide a clear floor area 36 inches mm minimum in width and 48 inches mm in depth.
Full text of “ANSI A (): Accessible and Usable Buildings and Facilities”
The rear wall grab bar shall be 36 inches mm minimum in length, and extend from the centerline of the water closet 1 2 inches mm minimum on the side closest to the wall, and 24 inches mm minimum on the transfer side. Characters shall be sans serif. A tactile z117.1-2003 shall be provided on both jambs at the main entry level. Already Subscribed to w117.1-2003 document. A single wheelchair space shall be 36 inches mm minimum in width. The front partition and at least one side partition shall provide a toe clearance of 9 inches mm minimum above the floor and extending 6 inches mm beyond the compartment side face of the parti- tion, exclusive of partition support members.
Drive up only automatic teller machines and fare machines shall not be required to comply with Section Buttons with floor designa- tions shall comply with 1a17 1a17.1-2003 receipts are provided, speech output devices shall provide audible bal- ance inquiry information, error messages, and all other information on the printed receipt neces- sary to complete or verify the transaction.
Unless specifically stated, figures included herein are provided for informational pur- poses only and are not considered part of the standard. Two horizontal grab bars shall be provided on q back wall, one com- plying with Section Grab bars shall be 6 inches mm maximum from the adjacent wall.
ANSI A117.1 (2003): Accessible and Usable Buildings and Facilities
If a clear floor space is in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearances complying with Sections Existing elevator car configura- tions that provide a clear floor area of 16 square feet 1. Clear width of landings shall be at ansj as wide as the widest ramp run leading to the landing. The high side reach shall be 48 inches mm maximum for a reach depth of 10 mm maximum. Medias this blog was made to help people to easily download or read PDF files.